(MAGVEYER™ IV)
An accumulation conveyor for heavy-weight loads
●This is a heavy-duty, heavy-load accumulation conveyor designed for heavy loads from 200 to 400 kg that the ordinary MAGVEYER™ III cannot handle.
●Size Table units: mm
Roller nominal dimensions W Weight (exclusive of the pillow
300 3.1Kg
400 3.9Kg
500 4.7Kg
600 5.5Kg
700 6.3Kg
800 7.1Kg
●Unit Specifications
No. Name Material Process and Standards
1 Sprocket SS400 JIS#50-11 teeth
2 Slide ring Nylon66 -
3 Washer SPC -
4 Spring SWPA -
5 Washer - JIS M14
6 Nut - JIS M14
7 Bearing - -
8 Roller STKM 5t
ALLOWABLE PROFILE OF ITEM ON CONVEYOR AND CONVEYABLE LOAD PER ONE ROLLER
The operator can freely set the torque to match a 5 to 20 kg item on the conveyor by using the torque adjuster knob to vary the pressure of the spring built into the roller interior. The bottom of the item on the conveyor shall be flat and consists of wood, steel, resin or that will not warp under its own weight.
Examples of pitch selection
SELECT THE ROLLER PITCH
The roller pitch shall be selected, provided that four or more rollers including free rollers always contact the bottom of the product item (The conveyor having the roller pitch of more than 80 mm can be provided).
The friction coefficient of the item on the conveyor varies with the material and shape, etc. Please consult with us if changes in the torque adjustment range are needed.

SEDICK Corporation
713 Terawaki-cho, Minami-ku, Hamamatsu City, Shizuoka Pref., Japan TEL:+81-53-442-5211 FAX:+81-53-442-1490